Audemars Piguet Royal Oak 15500 White Dial
Original price was: $1,150.00.$929.00Current price is: $929.00.
This Royal Oak 15500 pairs a silver-white Grande Tapisserie dial with the full 41mm by 51mm stainless steel case and the slim 10.4mm profile that defines the reference on the wrist. Its octagonal bezel, white gold-plated hex screws, and integrated brushed steel bracelet deliver the sharp alternating finishes collectors want from a 15500ST. Inside, the clone Calibre 4302 brings the correct visual layout through the caseback along with proper date positioning and a smooth 28,800 vph sweep.
The 15500ST layout in its cleanest white-dial form
This Audemars Piguet Royal Oak 15500 White Dial Super Clone Watch captures one of the strongest modern Royal Oak configurations: a 41mm stainless steel case, a silver-white Grande Tapisserie dial, and the integrated steel bracelet that gives the reference its unmistakable profile. On the wrist, the white dial changes character with the light. In softer indoor light it reads as a restrained silver-white, while the textured tapisserie surface adds shape and contrast that keep the dial from ever looking flat.
The applied hour markers are proportioned to suit the larger 15500 dial layout, giving the watch a more open look than earlier generations. The date display sits where it should visually, without the sunken effect seen on older movement layouts. That detail matters because the 15500 dial is all about balance: wide negative space, a strong minute track, and a crisp central display that feels modern without losing the Royal Oak's architectural identity.
The result is a Royal Oak that wears with real presence yet stays refined. If you want the angular lines and integrated bracelet silhouette of the 15500ST with the brightest, most versatile dial option, this is the configuration that delivers it.
Correct 41mm proportions with the slim 10.4mm case profile
Case geometry is everything on a Royal Oak, and this build stays true to the reference with a 41.0mm diameter, 51.0mm lug-to-lug span, and a 10.4mm thickness. Those measurements are a large part of why the watch feels right in use. It has the broad, flat stance expected from a Royal Oak, but the slim profile keeps it from becoming bulky. It sits low enough to work under a cuff while still maintaining the strong wrist footprint that makes the 15500 such a compelling daily wear piece.
The case is produced in 316L stainless steel and finished in the way this design demands: linear brushing across the broad surfaces, contrasted by polished bevels that outline the case and bracelet architecture. Those changing textures are central to the look. A Royal Oak should catch light in planes, not in rounded reflections, and this watch leans into that with the crisp transitions that give the case and bracelet their technical feel.
Weight is listed at 168.3 grams, reinforcing the substantial feel of the integrated steel construction. It has enough mass to feel planted and solid, but the slimness and bracelet articulation prevent it from wearing heavy or top-loaded.
Octagonal bezel detail and a bracelet that completes the design
The bezel is the defining signature here: the classic octagonal Royal Oak shape in stainless steel, vertically brushed to align with the case geometry and framed by polished edges. The eight hex screws are white gold-plated and set in the precise circular arrangement expected on this reference, creating the structured, technical face that makes the 15500 instantly recognizable from across a room.
That bezel only works when the rest of the watch is equally sharp, and the integrated 316L steel bracelet carries the design through properly. The bracelet is brushed overall, with polished accents that bring out the faceted construction of the links. Because the watch has no visual break between case and bracelet, this finishing is not a small detail; it is fundamental to how the entire piece reads on the wrist.
Fit at the case junction is tight, keeping endplay to a minimum and preserving the solid one-piece impression that distinguishes a good Royal Oak build. The AP folding clasp keeps the profile clean and secure, while the bracelet's flexibility helps the watch wrap naturally around the wrist instead of feeling rigid. That combination of angular styling and fluid articulation is one of the reasons the 15500 remains such a satisfying wear.
Clone Calibre 4302 and the right visual architecture through the back
Inside is the clone Calibre 4302, built specifically around the 15500 format rather than relying on a generic base movement with cosmetic additions. That matters both mechanically and visually. It allows the correct dial-side date placement and supports the reference-correct 10.4mm case thickness, which is a major part of this model's identity.
The movement runs at 28,800 vibrations per hour and offers approximately 36 hours of power reserve. Through the display caseback, the architecture fills the opening in a way that suits the 15500 properly, including the larger skeletonized rotor presence that collectors expect from this reference. Instead of leaving the back visually sparse, it gives the watch the fuller, more convincing movement presentation that the modern Royal Oak deserves.
The watch is fitted with a scratch-resistant sapphire crystal with colorless anti-reflective coating, helping keep the dial legible while preserving the sharpness of the tapisserie texture. Hours, minutes, center seconds, and instant date round out the functionality, keeping the package true to the everyday luxury-sport character of the 15500.
Built for close inspection and reviewed before it leaves us
This is a detail-driven watch, so the important points are the ones enthusiasts look at first: the 41mm by 51mm proportions, the slim 10.4mm profile, the silver-white Grande Tapisserie dial, the octagonal brushed bezel with white gold-plated hex screws, and the integrated steel bracelet with proper alternating finishes. Together they create the sharp, monochrome 15500ST look that works equally well with tailoring, knitwear, or a simple tee.
Before dispatch, each watch goes through a pre-shipment QC review focused on visible alignment, finishing consistency, bracelet fit, and overall presentation. We pay close attention to the dial furniture, bezel screw positioning, case finishing transitions, crystal condition, clasp operation, and the general appearance of the movement through the caseback. The goal is simple: when your watch arrives, it should present exactly like the high-spec 15500 white dial build you selected.
Watch specification
Configuration summary for this watch
| Brand | Audemars Piguet |
|---|---|
| Model | Royal Oak |
| Bracelet | Integrated 316L steel with AP folding clasp |
| Water Resistance | 30m stated |
| Bezel | Stainless steel |
| Movement | Calibre 4302 Clone |
| Case Size | 41.0mm |
| Case Material | 316L Stainless Steel |
| Crystal | Sapphire with AR |
QC proof before dispatch
Review the prepared Audemars Piguet before shipping
Contact support to check availability and receive QC proof for this exact configuration before you order.
Contact SupportRelated products
-
Audemars Piguet Royal Oak 15416 Skeleton Dial Super Clone Watch
Sale! Original price was: $1,749.00.$1,049.00Current price is: $1,049.00. Add to cart -
Audemars Piguet Royal Oak 15400 Blue Dial Super Clone Watch
Sale! Original price was: $1,050.00.$900.00Current price is: $900.00. Add to cart -
Audemars Piguet Purple Dial 26240 Royal Oak Selfwinding Chronograph Super Clone Watch
Sale! Original price was: $1,799.00.$1,299.00Current price is: $1,299.00. Add to cart -
Audemars Piguet Code 11.59 by 15210BC Black Dial 41mm Leather Strap Super Clone Watch
Sale! Original price was: $1,150.00.$929.00Current price is: $929.00. Add to cart -
Audemars Piguet Code 11.59 Smoky Blue Dial 26393BC 41mm Super Clone Watch
Sale! Original price was: $1,799.00.$1,199.00Current price is: $1,199.00. Add to cart -
Audemars Piguet Royal Oak 15407 Skeleton Dial Super Clone Watch
Sale! Original price was: $1,150.00.$949.00Current price is: $949.00. Add to cart -
Audemars Piguet Royal Oak 15450 Blue Dial 37mm Super Clone Watch
Sale! Original price was: $1,499.00.$899.00Current price is: $899.00. Add to cart -
Audemars Piguet Royal Oak 15500 Blue Dial Super Clone Watch
Sale! Original price was: $1,150.00.$929.00Current price is: $929.00. Add to cart
