Sale!

Patek Philippe Cubitus 5821/1A-001 Green Dial product view super clone watch

Patek Philippe Cubitus 5821/1A-001 Green Dial

Super Clone Watch

Original price was: $980.00.Current price is: $750.00.

This is the Cubitus to choose if your priority is the correct ultra-thin stance, the right olive green dial treatment, and the sharp geometry of the brushed rounded-square bezel. BBAF’s advantage here is specific: it delivers the crucial 8.3mm profile instead of chasing a thicker movement layout that changes the watch’s whole character on the wrist. Add the integrated steel bracelet and framed date at 3 o’clock, and this becomes a very particular proposition. The detailed description matters because this reference is all about proportion, finishing, and the tradeoffs behind that slim case.

Configuration Details Confirmed before shipment

Movement Modified Caliber 26-330 S C (Miyota 9015 Base), approximately 36 hours

Case Material 316L Stainless Steel

Bezel 316L steel, vertical brushing with polished chamfers

Crystal Sapphire Crystal with colorless AR coating

Bracelet Integrated 316L steel bracelet, brushed finish, lockable adjustment system

Water Resistance 30m stated

SKU: patek-philippe-cubitus-5821-1a-001-green-dial-super-clone-watch Categories: IN STOCK SALE, Patek Philippe Brand: Patek Philippe

Patek Philippe

The olive green dial is what makes this watch work

The first thing that lands is the dial: olive green, horizontally embossed, and laid out with strong contrast against the applied baton markers and matching handset. On the Cubitus, that horizontal relief is not a minor styling cue. It is the surface that gives the watch its depth and keeps the square-forward case from feeling flat or heavy. Here, the green tone and the clean date display at 3 o’clock give the watch the exact visual tension collectors want from this reference: sporty, architectural, and still recognizably Patek in its restraint.

If you are considering this model over a more conventional integrated-bracelet sports watch, that is the deciding difference. The Cubitus does not rely on a round case and a simple textured dial. It uses a broad dial opening, straight horizontal patterning, and a very deliberate frame around the date to create presence. That makes small finishing details matter more than usual, and this piece gets the core visual priorities right.

Why the 8.3mm profile matters on the 5821/1A

BBAF built this version around the feature that defines the reference on the wrist: the thin 8.3mm case profile. That number is not just a spec-sheet talking point. On a watch with this much dial area, an integrated bracelet, and a rounded-square bezel, extra thickness quickly changes the balance. A slim middle case keeps the Cubitus elegant instead of blocky, and it preserves the cuff-friendly shape that gives the design its appeal.

This is also where this edition separates itself from early alternatives. Some competing executions pursue a different movement approach but end up losing the visual discipline of the original proportions. For many knowledgeable buyers, that is the wrong trade. If you are buying a Cubitus, the case silhouette and side profile are not secondary concerns. They are the watch.

The bezel and case finishing do the heavy lifting

The bezel is executed in steel with vertical brushing across the top and polished chamfers that catch light around the perimeter. That contrast is critical on this design because the bezel is broad, flat, and impossible to ignore. Without a crisp transition between brushed and polished surfaces, the Cubitus can look blunt. With it, the case gains definition and the unusual geometry starts to make sense from every angle.

The 316L stainless steel case and integrated bracelet continue that same visual logic. From the front, the watch reads clean and assertive. From the side, the polished case flank reinforces the thinness of the build. It is a watch that depends on edge control, surface changes, and proportion more than ornament, which is exactly why experienced buyers inspect this reference so closely before choosing one version over another.

The movement choice is about proportions first

Inside is a modified caliber styled after the 26-330 S C and built on a Miyota 9015 base, with approximately 36 hours of power reserve. That choice was made to preserve the thin case architecture, and for this specific model, that is a rational decision. BBAF prioritized the physical form of the Cubitus over a thicker movement setup that would compromise the watch’s most important trait.

Functionally, you get the essentials this reference needs: central hours, minutes, sweep seconds, and a date at 3 o’clock. For a buyer who values the Cubitus primarily as a modern geometric sports watch, that is the right focus. The point of this piece is not complication density. It is the way a slim automatic watch, a sharply defined bezel, and a structured green dial come together in one integrated design.

The bracelet completes the watch instead of merely attaching to it

The integrated 316L steel bracelet is part of the identity of the 5821/1A, not an accessory. Its brushed finish continues the case language, and the lockable adjustment system adds practicality to a watch that will often be worn as an everyday steel piece. Because the bracelet flows directly from the case, it helps the Cubitus sit as one continuous object rather than a head-and-strap combination.

That is why this model deserves close reading before purchase. The success of the Cubitus depends on the relationship between profile, bezel geometry, dial texture, and bracelet integration. When those points are right, the watch has the crisp, contemporary presence that made this reference so widely discussed from the moment it appeared.

Watch specification

Configuration summary for this watch

Brand	Patek Philippe
Movement	Modified Caliber 26-330 S C (Miyota 9015 Base), approximately 36 hours
Case Material	316L Stainless Steel
Bezel	316L steel, vertical brushing with polished chamfers
Crystal	Sapphire Crystal with colorless AR coating
Bracelet	Integrated 316L steel bracelet, brushed finish, lockable adjustment system
Water Resistance	30m stated

Buyer Q&A

Questions about this Patek Philippe watch

Why is the 8.3mm case thickness such a big deal on this model?

The Cubitus design depends on a broad dial opening, a large integrated bracelet footprint, and a very flat geometric bezel. Keeping the case at 8.3mm preserves the slim side profile that gives the 5821/1A its intended balance and cuff-friendly shape.

What functions does this watch offer?

It has central hours, minutes, sweep seconds, and a date display at 3 o’clock.

What sets this BBAF version apart from thicker alternatives?

Its main advantage is dimensional accuracy in the case profile. BBAF chose a slim automatic base architecture to maintain the 8.3mm thickness, which keeps the overall shape and wrist presence closer to what makes the Cubitus appealing in the first place.

QC proof before dispatch