HublotSpirit of Big Bang642.NX.0170.RX

Hublot Spirit of Big Bang Titanium 42mm 642.NX.0170.RX 42mm

Original price was: $1,349.00.Current price is: $849.00.

Buying notes for this configuration

642.NX.0170.RX earns attention through texture rather than color. Satin titanium keeps the 42mm tonneau case controlled, while polished bevels and H-screws preserve its edges. Black side guards deepen the outline around the skeletonized sapphire dial, and the structured rubber strap makes the whole profile feel cohesive. The specified modified Asian 7750 automatic chronograph adds a functional stopwatch and date display to the open architecture. Compare 642.OX.0180.RX when rose-gold tone should be the leading impression; choose NX for grey, black and technical wardrobes where a lower-shine case is easier to live with.

The Hublot Spirit of Big Bang 642.NX.0170.RX is a 42mm titanium chronograph with a satin-finished tonneau case, polished bevels, H-screws, black side guards and a skeletonized sapphire dial. Its structured black rubber strap and titanium deployant clasp reinforce the technical profile. Choose it when surface texture, cooler color and clear chronograph function matter more than a warm metallic finish.

Display estimate. Cart and checkout remain in USD.
Buy Now
QC proof before dispatchPhotos or video are prepared for the exact watch before it leaves.

Confirmed configuration

Movement
Modified Asian 7750 automatic chronograph with HUB4700 decoration
Case Material
Titanium
Bezel
Satin-finished titanium with polished bevels and H-screws
Crystal
Scratch-resistant sapphire with AR coating
Bracelet
Structured black rubber strap with titanium deployant clasp
Water Resistance
30m
SKU: hublot-spirit-of-big-bang-titanium-42mm-642-nx-0170-rx-super-clone-watch Categories: , Brand:
Worldwide priority shippingQC processShipping information

The 642.NX.0170.RX takes the Spirit of Big Bang's barrel-shaped outline in a cooler direction. Satin-finished titanium gives the 42mm case a controlled, low-shine surface, while polished bevels and H-screws add just enough edge definition to keep the architecture visible. Black side guards and a structured black rubber strap deepen the contrast around the skeletonized sapphire dial. This is the reference for buyers who prefer technical texture over warm metal color.

Satin surfaces make the geometry readable

The case is not a flat grey block. Its satin planes absorb light differently from the polished bevels, so the tonneau profile remains clear as the wrist moves. H-shaped screws punctuate the bezel, and the black side guards create a firm boundary around the central dial. Together those details give the watch a measured industrial character, even though the skeletonized display remains visually active.

Chronograph information without a round case

The configured modified Asian 7750 automatic chronograph carries HUB4700-style decoration, with a fully functional stopwatch, date display, 28,800 VPH operation and approximately 36 hours of power reserve listed for this product. These operating details are useful because the open dial can otherwise seem purely decorative. Scratch-resistant sapphire with AR coating protects the view, and the titanium deployant clasp completes the structured black rubber strap.

Choose the cooler case direction

The 642.OX.0180.RX is the closest comparison when a rose-gold-tone case and open chronograph should bring more warmth to the wrist. The titanium 642.NX.0170.RX is the better selection for black, grey and technical wardrobes, or for a buyer who wants the case finish to stay quieter while the dial and side guards supply the contrast. The choice is primarily about surface character, not just color.

How to judge the profile

Start with a straight-on dial view to check the skeleton layout, date position and chronograph registers. Then use a side view to inspect the 16.6mm profile, crown and pusher geometry, and the black guards that give the case its layered edge. The structured strap should look like a continuation of that architecture rather than an afterthought.

QC for satin titanium and moving functions

QC should inspect the satin grain across the case, the polished bevel transitions and every H-screw. Confirm black side-guard alignment, date display, chronograph start, stop and reset, then check the strap-to-case fit and titanium deployant closure. A useful proof set combines dial, side profile and clasp views so the surface finish and functional controls are both accounted for.

Questions to settle before ordering

Why select the titanium 642.NX.0170.RX?

Its satin titanium case, polished bevels and black side guards create a cooler technical presence, while the skeletonized dial retains the Spirit of Big Bang character.

What functions are listed for this chronograph?

The configured modified Asian 7750 automatic chronograph is listed with a functional stopwatch, date display, 28,800 VPH operation and approximately 36 hours of power reserve.

What should QC verify on the titanium model?

Inspect satin grain and polished bevel transitions, H-screw placement and side-guard alignment, then check date display, chronograph start-stop-reset, strap fit and deployant clasp closure.

Review the exact configuration before it leaves.

Use model-specific QC proof to confirm the visible details and stated functions that informed your choice.

Contact Support

QC proof before dispatch