Sale!

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch front view

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch dial detail

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch bezel detail

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch bracelet or strap fit

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch clasp detail

IWC IW328908 Ingenieur Automatic 40 Green Dial super clone watch caseback detail

IWC IW328908 Ingenieur Automatic 40 Green Dial

Super Clone Watch

Original price was: $989.00.Current price is: $829.00.

If you want the Ingenieur look in its most characterful modern form, this is the one to buy. The decision points are the olive-green grid dial, the sharply brushed 5-screw bezel, and the correctly integrated steel bracelet that gives the case its full Genta-era stance. Compared with plainer dial colors, the green reference has far more depth because the stamped pattern and applied markers catch light differently across the dial. The detailed description matters here because this watch is all about proportion, texture, and how the slim automatic build supports the design.

Configuration Details Confirmed before shipment

Movement Asian ETA-2892 Clone automatic, 28,800 VPH, approximately 36 hours power reserve

Case Material 316L stainless steel

Bezel Stainless steel 5-screw polygonal bezel

Crystal Sapphire with double AR coating

Bracelet Integrated 316L steel bracelet with butterfly clasp

SKU: iwc-iw328908-ingenieur-automatic-40-green-dial-super-clone-watch Categories: IN STOCK SALE, IWC Brand: IWC

IWC

The green grid dial is the whole point of this reference

At first glance, the appeal is obvious: a rich green dial built around a stamped grid motif that gives the Ingenieur its technical, architectural feel. On this IW328908, the color is not flat. It shifts between olive, moss, and a deeper muted green depending on angle and light, which keeps the watch visually active without becoming flashy. The applied baton markers stand out cleanly against that textured surface, and the framed date at 3 o’clock breaks the pattern in a way that feels deliberate rather than crowded. If you are choosing between this and a simpler dial variant, the green model gives you much more interplay between texture, color, and polished hand furniture.

The bezel and case finishing create the Ingenieur identity

This watch only works if the bezel geometry is done properly, and that is where this execution earns attention. The round bezel uses the distinctive five-screw layout that defines the modern Ingenieur, with a broad brushed top surface that contrasts against polished bevel transitions around the case. Those changes in finish are what keep the watch from looking like a plain steel sports model. The lines feel deliberate and mechanical, which suits the design language perfectly. The 40mm steel case also lands in a very usable size for US and European buyers who want presence on the wrist without the oversized feel that can make integrated-bracelet watches wear awkwardly.

The slim automatic layout matters more here than on most sports watches

GH Factory built this version around an Asian ETA-2892 clone automatic movement, beating at 28,800 VPH with approximately 36 hours of power reserve. That choice matters because the Ingenieur is not a chunky tool watch. Its appeal depends on a relatively slim profile so the case can sit flat and keep the bracelet flowing naturally from the lugs. The movement also supports center hours, minutes, hacking seconds, and a quick-set date, which covers the practical daily functions most owners actually use. For a watch with this kind of integrated design, movement architecture is not just a spec-sheet detail; it directly affects whether the watch keeps the intended proportions.

The integrated bracelet gives the case its full shape on the wrist

An Ingenieur without the right bracelet never feels complete, and this one is fitted with the integrated brushed steel bracelet that the reference calls for. The bracelet tapers toward a butterfly clasp and visually extends the case rather than merely attaching to it. That is a crucial difference from a standard lug-and-strap sports watch. It gives the watch a continuous, sculpted profile and helps balance the brushed surfaces across the entire piece. GH Factory is especially relevant on this reference because the combination of ETA-2892 architecture and approximately 150g overall weight helps preserve the slim, substantial feel that collectors look for in this design. If you have compared versions and care most about case geometry and the way the watch sits as a single integrated object, that is the real reason to focus on this execution.

Why this reference stands out in a collection

The IW328908 works best for someone who already understands that not all steel sports watches offer the same experience. This is less about loud branding and more about proportion, surface treatment, and dial depth. The green textured dial gives it personality, the five-screw bezel provides structure, and the integrated bracelet keeps the whole design cohesive. Sapphire crystal with double AR coating also helps preserve clarity over that textured dial, which is important because so much of the value here is visual. If you want a piece that feels distinct from the usual diver or plain three-hand bracelet watch, this Ingenieur earns its place by doing the small design details correctly and letting them work together.

Watch specification

Configuration summary for this watch

Brand	IWC
Movement	Asian ETA-2892 Clone automatic, 28,800 VPH, approximately 36 hours power reserve
Case Material	316L stainless steel
Bezel	Stainless steel 5-screw polygonal bezel
Crystal	Sapphire with double AR coating
Bracelet	Integrated 316L steel bracelet with butterfly clasp

Buyer Q&A

Questions about this IWC watch

What functions does this watch offer?

It has center hours, minutes, central hacking seconds, and a quick-set date displayed at 3 o’clock.

Why is the ETA-2892 style movement important in this Ingenieur?

This reference depends on a relatively slim case profile to keep the integrated bracelet and case geometry looking right. The ETA-2892 clone is used here specifically to support that thinner overall build.

What stands out visually on the dial?

The dial combines a green tone with a stamped grid structure, applied baton markers, a framed date window at 3 o’clock, and baton-style hands with luminous inlays.

QC proof before dispatch