Sale!

Patek Philippe Cubitus 7128/1G-001 Blue Dial product view super clone watch

Patek Philippe Cubitus 7128/1G-001 Blue Dial

Super Clone Watch

Original price was: $850.00.Current price is: $650.00.

For collectors curious about the Cubitus without settling for a thick early release, this is the one to focus on. The draw is clear: the slim 8.2mm profile, the blue horizontal dial with strong light-to-dark shift, and the sharply brushed square bezel flowing into the integrated steel bracelet. BBA Factory matters here because this reference lives or dies by case geometry, and many first-wave alternatives missed that proportion. The detailed description is worth reading because the movement layout, caseback presentation, and date execution directly shape day-to-day ownership.

Configuration Details Confirmed before shipment

Movement Clone 324/9015 Hybrid (decorated as 26-330 S C), approximately 36 hours power reserve

Case Material 316L stainless steel

Bezel 316L stainless steel with vertical brushing and polished chamfers

Crystal Sapphire with colorless AR coating

Bracelet Integrated 316L stainless steel bracelet with fold-over clasp

Water Resistance 30m stated

SKU: patek-philippe-cubitus-7128-1g-001-blue-dial-super-clone-watch Categories: IN STOCK SALE, Patek Philippe Brand: Patek Philippe

Patek Philippe

The blue dial is what makes this Cubitus convincing on the wrist

The first thing you notice is not the case shape but the dial surface inside it. The blue dial carries a horizontal embossed pattern that gives the watch structure without making it look busy, and the sunburst effect shifts from a darker navy tone to a brighter steel-blue depending on angle. Against that backdrop, the applied baton markers and matching hands stand out cleanly, while the framed date at 3 o’clock keeps the layout practical. On the wrist, that combination matters because the Cubitus design can feel severe if the dial lacks contrast. Here, the horizontal texture softens the geometry and gives the watch more visual depth.

The 8.2mm case profile is the deciding factor on this reference

This watch is offered with a measured 8.2mm thickness in 316L stainless steel, and that number is more than a specification sheet detail. The Cubitus concept depends on a broad square silhouette that still sits flat and controlled from the side. If the case becomes too thick, the whole design loses its point. BBA Factory earned attention on this model by getting that slim profile right early, which is why it stands out from bulkier first-generation versions. The case itself shows the mix that makes the Cubitus interesting: a broad vertically brushed bezel face, polished chamfered edges, and a case shape that feels architectural rather than rounded. In person, the sharp transitions between brushed and polished surfaces do most of the work.

The integrated bracelet keeps the watch cohesive

The integrated steel bracelet is not an accessory on this watch; it is part of the design language. The brushed link tops and polished center contours continue the same alternating finish seen on the case, so the whole watch reads as one object instead of a head and bracelet joined together. That continuity is especially important on a square sports-dress design like this one, where a mismatched bracelet would break the effect immediately. The fold-over clasp is paired with a taper that helps the watch wear with more balance, and the flush connection to the case preserves the clean side profile that collectors are looking for in this model.

What you are getting mechanically

Inside is a Clone 324/9015 hybrid movement decorated to resemble the 26-330 S C, with approximately 36 hours of power reserve. Through the display caseback, you can see the gold-tone central rotor and the decorated bridge layout, which adds a lot to the ownership experience if you enjoy turning the watch over and studying finishing details. The practical point to know is that this movement uses a unidirectional winding system and does not offer hacking seconds when setting the time. That is relevant because many experienced buyers looking for the exact operational reality upfront, especially on a watch they expect to wear and handle regularly rather than simply admire in a box.

Who this Cubitus suits best

This is a strong choice for someone who wants to understand why the Cubitus has created so much discussion without compromising the proportion that defines the watch. It is not about chasing exaggerated shine or novelty for its own sake. The appeal is the combination of a thin square profile, disciplined brushing, a textured blue dial, and an integrated bracelet that makes the case feel complete. If you are comparing versions, this one earns attention because the execution advantage is tied to the specific things that matter most on the wrist: thickness, geometry, dial contrast, and the way the bracelet meets the case. That is exactly where this reference succeeds.

Watch specification

Configuration summary for this watch

Brand	Patek Philippe
Movement	Clone 324/9015 Hybrid (decorated as 26-330 S C), approximately 36 hours power reserve
Case Material	316L stainless steel
Bezel	316L stainless steel with vertical brushing and polished chamfers
Crystal	Sapphire with colorless AR coating
Bracelet	Integrated 316L stainless steel bracelet with fold-over clasp
Water Resistance	30m stated

Buyer Q&A

Questions about this Patek Philippe watch

Does this watch have a date display?

Yes. It has a date window at 3 o’clock, framed to match the dial furniture and easy to read against the blue dial.

What stands out about this version compared with other early Cubitus releases?

The key point is the 8.2mm case thickness. On this model, the slim profile is central to how the square case is meant to look and sit on the wrist, and thicker early versions lose that balance.

What can you see through the caseback?

The display back shows a decorated movement with a gold-tone central rotor and visible bridge finishing, giving the watch a more complete presentation when viewed off the wrist.

QC proof before dispatch